Following these 12 steps when designing gate drive transformers will ensure a long component life and optimal performanceContinue reading
Catégorie : Power Supply
Gate Drivers, Power Supply, SMPS, Switched-Mode
8 points à considérer avant de concevoir un transformateur de commande de portail
Several important factors need to be considered when designing an optimized gate drive transformer (GDT). This article discusses several GDT design considerations, as well as ideal applications for their use. Two of the critical components to control when designing a gate-drive transformer are the leakage inductance and distributed capacitance. High leakage inductance and distributed capacitance...Continue reading
Gate Drivers, Power Supply, SMPS, Switched-Mode
Gate Drive Transformer Pulse Response Characteristics
A gate drive transformer must reproduce the shape of an input pulse as accurately as possible at its secondary terminals. The performance of a gate drive transformer’s pulse characteristics is specified in terms of its effect on the shape of the pulse input current/voltage. It is important that the transformer must reproduce the shape of...Continue reading
Gate Drivers, Power Supply, SMPS, Switched-Mode
Introduction to Gate Drivers for Power Electronics
A gate driver is a power amplifier that accepts a low-power input from a controller IC and produces the appropriate high current gate drive for a power device. As requirements for power electronics continue to increase, the design and performance of the gate driver circuitry are becoming ever more important.Continue reading
Power Supply, SMPS, Switched-Mode
12 étapes pour la conception de transformateurs SMPS
Designing magnetic components for SMPS can be challenging due to the increasing demands of modern electronics designs. Following these 12 steps can help engineers navigate the challenges and ensure a successful projectContinue reading
Power Supply, SMPS, Switched-Mode
SMPS: Phase-Shifted Full-Bridge Converters
Phase-shifted full-bridge (PSFB) converters reduce switching loss and increase efficiency by phase-shifting the gate signals between the leading leg and the lagging leg switches without additional circuitsContinue reading
Power Supply, SMPS, Switched-Mode
SMPS: Resonant Converters
Demand for smaller electronics (and thus smaller power supplies) continues to increase. Resonant techniques are used to allow for high-frequency operation in switched-mode power supplies, which in turn allows for smaller componentsContinue reading
Power Supply, SMPS, Switched-Mode
SMPS: Symmetrical Isolated Converters
The fourth article in our series on switched-mode power supplies (SMPS) covers the main types of symmetrical isolated converter topologies: push-pull, half-bridge, et full-bridgeContinue reading
Power Supply, SMPS, Switched-Mode
SMPS: Asymmetrical Isolated Converters
Isolated SMPS topologies are split into two main categories depending upon how the transformer is utilized: asymmetrical and symmetrical. In this article, we discuss asymmetrical isolated converter topologies.Continue reading
Power Supply, SMPS, Switched-Mode
SMPS : Non-Isolated Converters
Non-isolated converters are less common than isolated converters among typical switched-mode power supply (SMPS) topologies. But they still have several useful applications.Continue reading
English 
Deutsch 
Français 
Čeština 
Italiano 
Español